Mains Connected Water Cooler Help
Useful tips
We suggest regular cleaning to help maintain your machines overall performance and hygiene. Consistent cleaning can also help prevent the need for call outs or small problems that could have been avoided.
Keeping your machine clean
We suggest regular cleaning to help maintain your machines overall performance and hygiene. Consistent cleaning can also help prevent the need for call outs or small problems that could have been avoided.
Do's and Don'ts
Please find below some do's and on'ts for using your cooler correctly. It is important to follow these to make sure your cooler function is maintained in the long term.
​
Do's:
-
Report cooler malfunctions and leaks to us. This allows us to help provide support for the issue.
-
Follower handling guidelines when lifting or loading bottles onto the cooler. Coolers and their bottles are much heavier than you may expect, so it is important to follow guidelines to prevent unnecessary injuries.
-
Empty and clean the drip tray regularly
-
Use sanitsing spray provided on taps when required. Please ask if you are in need of some.
-
Report unusual taste, smell or water turning green in the bottle, back to us.
-
Rotate stock of bottled in expiry date order
-
Store all full and unopened bottles of water in a cool, dark space
-
Kepp bottles away from taining sunstances such as solvents, fuels etc.
-
Wash your hands before changing bottles
-
Replace an open bottle if it has not been touched in 3 weeks, even if there is water remaining in the bottle.
-
Return your empty bottles back to us.
​
Don'ts
-
Dispense liquids other than water from your cooler
-
Interfere with the electrical circuits or change the fuse rating
-
Attempt to dismantle the cooler
-
Use the cooler as a storage shelf
-
Touch the tap nozzles or dispense water with dirty hands
-
Pour unwanted drinks (like tea, coffee, etc) into the drip tray
-
Leave the cooler connected to the electrical supply if the bottle is empty
-
Leave the cooler uncovered if it is not fitted with a bottle
-
Relocate the cooler without informing us first
-
Place the machine in direct sunlight or close to bright lights
-
Move the cooler whilst the bottle is fitted
-
Lay the cooler on its side
-
Use unapproved sprays, mists or vapours near the cooler
-
Use corrosive, abrasive or perfumed cleaners on the exterior surfaces
-
Load bottled onto the cooler without removing the protective label
-
Change bottles, saintise or dispense water if suffering from gastro-intestinal symptoms, septic cuts, abscesses or any condition which may threaten water safety
Machine shutdown help
If you are away from your machine for 5 days or more, it is important to make sure the machine is shutdown correctly. This help prevent issues whilst you are away and maintains proper function for when you return.
​​
Step 1
Turn the mains water supply off to the machine at the point of the connection to your mains water supply. When the black tap is facing in line with the plumbing, the mains water supply is ON. To isolate the water supply, turn the tap 90° so it is no longer in line with the piping. The mains water is now OFF.
*If you can’t access this point, please go to step 2
​
Step 2
If you are unable to turn the mains water isolation point off, pleas turn the secondary isolation tap off which can be found close to the rear of your machine. When the blue tap is in line with the plumbing, the water is ON. To isolate the water, please turn the tap 90° so it is no longer in line with the piping. The mains water is now OFF.
​
Step 3
With the mains water now turned OFF, switch the power supply to your hot & cold equipment OFF.
Useful Documents
We've put together a few handy documents that can help with regular maintenance of your cooler. Take a look at these documents below.
Catalogue
Cleaning doc